In this article, I’ll show you how to refill a puff bar. Teenagers love puff bars, which is a fact that everyone knows. It is not surprising if you are one of them. They don’t cost much and work very well. But it also has a bad side: they can only be used once. Even though the company says you can have at least 800 puffs, this is not entirely true. And many people think the puff bar’s battery life is not very good. So, this is why. In this article, I’ll tell you how to refill your puff bar so that you can use it as many times as you want.
Table of Contents
Step 1:
You’ll need a USB cable that works for this. Then you need to cut the wires to make a temporary charger for your puff bar. Once you have the USB cable, cut the part of the cable that has the button. And the one you stick into your cell phone.
Step 2:
Now, carefully pull the rubber part off of both the Red and Black wires with a pair of pliers. This should take about an inch. Once enough of the copper is exposed, you can use the same wire. You can now move on to the next step.
Step 3:
Using your puff bar, try to open the lid from the bottom by dragging it towards you. Make sure to do this carefully, because if one of the wires breaks, you’ll waste your puff and not even be able to recharge. If you think you can’t get it out of your hand, you can even use pliers to help. Just remember that you shouldn’t try to take all of the parts off. Just enough to make the head pop and give you a chance to charge the battery.
Step 4:
Once the head section of the puff bar has been carefully removed, you will notice a wired battery attached to it. The wires you can see in the battery are also the same as Red. And Black is just like our USB cable. This means that they can be used to charge with your puff bar. Since the USB cable doesn’t have much power on its own, you won’t have to worry about overcharging the battery.
Step 5:
Now that you’ve seen both the Red and Black wires on the battery and USB cable, you may move on to the next step. Now it’s your turn. Of course, charging the puff bar is now easier than ever. You have to put the USB cable wires in the same color as the battery wires, which might not be obvious. This means that you should connect the Red USB cable to the Red USB port and the Black USB cable to the Black USB port. As soon as you do that, the battery will start to get charged. Even though there are no lights to show that the charging has begun, you should still go with your gut.
Step 6:
Once you’ve put the two wires in the right places, you have to hold them there. You can use tape to connect the wires, but make sure you do it right. If the wires aren’t connected correctly, the charging won’t work. No matter how you hold the wires, keep doing the same thing for about 10 minutes. This is the number that most people find to be perfect. And their batteries can be fully charged in this amount of time.
Step 7:
When you connect the charger to the electricity, make sure the intermediate charger is not very high voltage. In this case, it’s perfectly fine to use a phone charger. It’s great to use an iPhone charger. We all know that one of the best things about the iPhone is how safe its chargers are. Yeah, you are good to go. Also, don’t try to hold the charging up to your face. And make sure you’re not too close to the charging. And in case you need to make a note of the charge, you can do that right away.
Things to remember
1) Don’t charge your puff bar if you think that some of the wires may have been broken when you opened it.
2) You can buy flavors on the Internet, and you can use them to change your device’s default puff.
3) Even though the way to fill up your puff bar is safe. When charging the puff bar, you must be very careful.
